1、配置內核信道監管域

WiFi信道根據國家地區的不同，有著嚴格的頻道劃分，某些5G信道可以作為雷達探測使用，這意味著 如果有路由器工作在雷達探測保留信道，那么意味著你很可能不能在上邊注入，解除認證，以及創建虛假克隆 AP。因此我們需要根據WiFi信道順從表，修改內核監管域國家代碼，以影響無線網卡工作頻段，使其 能正常注入、解除認證、創建AP等

WLAN信道順從表案例：https://www.docin.com/p-2253061296.html

編輯開機啟動配置文件

# 編輯配置，使得每次開機將無線網卡工作頻率
# 國家代碼設置為CN（中國），特別推薦PA（巴拿馬）可以避開雷達信道，解除認證5G杠杠的
╰─ vim /etc/rc.local
#!/bin/bash
# THIS FILE IS ADDED FOR COMPATIBILITY PURPOSES
#
# It is highly advisable to create own systemd services or udev rules
# to run scripts during boot instead of using this file.
#
# In contrast to previous versions due to parallel execution during boot
# this script will NOT be run after all other services.
#
# Please note that you must run 'chmod +x /etc/rc.d/rc.local' to ensure
# that this script will be executed during boot.
# set wlan frequency country code to PA/CN
iw reg set PA
 
exit 0
 
# 添加執行權限
╰─ chmod +x /etc/rc.local

復制

使配置生效

# 重啟服務
╰─ systemctl restart rc-local.service
 
╰─ systemctl status rc-local.service
 
# 或者重啟機器
╰─ reboot

復制

之后你會發現8812au將能夠成功deauth解除認證所有5G信號

#配置完成后驗證信道
#你應該能看到如下輸出
#信道后邊應該沒有任何特殊標記
#說明我們可以在上邊執行deauth與創建AP
 
╰─ iw list
Wiphy phy0
 
        Frequencies:
            * 2412 MHz [1] (20.0 dBm)
            * 2417 MHz [2] (20.0 dBm)
            * 2422 MHz [3] (20.0 dBm)
            * 2427 MHz [4] (20.0 dBm)
            * 2432 MHz [5] (20.0 dBm)
            * 2437 MHz [6] (20.0 dBm)
            * 2442 MHz [7] (20.0 dBm)
            * 2447 MHz [8] (20.0 dBm)
            * 2452 MHz [9] (20.0 dBm)
            * 2457 MHz [10] (20.0 dBm)
            * 2462 MHz [11] (20.0 dBm)
            * 2467 MHz [12] (20.0 dBm)
            * 2472 MHz [13] (20.0 dBm)
            * 2484 MHz [14] (20.0 dBm)
 
        Frequencies:
            * 5075 MHz [15] (30.0 dBm)
            * 5080 MHz [16] (30.0 dBm)
            * 5085 MHz [17] (30.0 dBm)
            * 5090 MHz [18] (30.0 dBm)
            * 5100 MHz [20] (30.0 dBm)
            * 5120 MHz [24] (30.0 dBm)
            * 5140 MHz [28] (30.0 dBm)
            * 5160 MHz [32] (30.0 dBm)
            * 5180 MHz [36] (30.0 dBm)
            * 5200 MHz [40] (30.0 dBm)
            * 5220 MHz [44] (30.0 dBm)
            * 5240 MHz [48] (30.0 dBm)
            * 5260 MHz [52] (30.0 dBm)
            * 5280 MHz [56] (30.0 dBm)
            * 5300 MHz [60] (30.0 dBm)
            * 5320 MHz [64] (30.0 dBm)
            * 5340 MHz [68] (30.0 dBm)
            * 5360 MHz [72] (30.0 dBm)
            * 5380 MHz [76] (30.0 dBm)
            * 5400 MHz [80] (30.0 dBm)
            * 5420 MHz [84] (30.0 dBm)
            * 5440 MHz [88] (30.0 dBm)
            * 5460 MHz [92] (30.0 dBm)
            * 5480 MHz [96] (30.0 dBm)
            * 5500 MHz [100] (30.0 dBm)
            * 5520 MHz [104] (30.0 dBm)
            * 5540 MHz [108] (30.0 dBm)
            * 5560 MHz [112] (30.0 dBm)
            * 5580 MHz [116] (30.0 dBm)
            * 5600 MHz [120] (30.0 dBm)
            * 5620 MHz [124] (30.0 dBm)
            * 5640 MHz [128] (30.0 dBm)
            * 5660 MHz [132] (30.0 dBm)
            * 5680 MHz [136] (30.0 dBm)
            * 5700 MHz [140] (30.0 dBm)
            * 5720 MHz [144] (30.0 dBm)
            * 5745 MHz [149] (30.0 dBm)
            * 5765 MHz [153] (30.0 dBm)
            * 5785 MHz [157] (30.0 dBm)
            * 5805 MHz [161] (30.0 dBm)
            * 5825 MHz [165] (30.0 dBm)
            * 5845 MHz [169] (30.0 dBm)
            * 5865 MHz [173] (30.0 dBm)
            * 5885 MHz [177] (30.0 dBm)

復制

2、配置fluxion以修復5Ghz創建AP

配置fluxion以支持創建5G頻段的AP

#編輯ap腳本文件
╰─ cat 桌面/fluxion-fix-for-5Ghz/lib/ap/hostapd.sh 
 
function ap_service_prep() {
  if [ ${#@} -lt 5 ]; then return 1; fi
  
  APServiceInterface=$1
  APServiceInterfaceAddress=$2
  APServiceSSID=$3
  APServiceMAC=$4
  APServiceChannel=$5
  
  ap_service_stop
 
  # Prepare the hostapd config file.
  country_code="$(iw reg get | awk 'FNR == 2 {print $2}' | cut -f 1 -d ":" 2> /dev/null)"
  [[ ! ${country_code} =~ ^[A-Z]{2}$ ]] && country_code="00"
  rm -rf "$APServiceConfigDirectory/$APServiceMAC-hostapd.conf" > /dev/null 2>&1
 
  echo "
interface=$APServiceInterface
driver=nl80211
ssid=$APServiceSSID
channel=$APServiceChannel" 
  >> "$APServiceConfigDirectory/$APServiceMAC-hostapd.conf"
 
  if [[ ${APServiceChannel} -gt 14 ]];then
      {
      echo -e "hw_mode=a"
      } >> "$APServiceConfigDirectory/$APServiceMAC-hostapd.conf"
  else
      {
      echo -e "hw_mode=g"
      } >> "$APServiceConfigDirectory/$APServiceMAC-hostapd.conf"
  fi
 
  if [[ "${country_code}" != "00" ]];then
      {
      echo -e "country_code=${country_code}"
      } >> "$APServiceConfigDirectory/$APServiceMAC-hostapd.conf"
  fi

復制

添加如下代碼

之后，你會發現fluxion將會正常創建5G頻段的AP，不會卡住

審核編輯 黃宇