--文件名:lcd_driver.vhd。
--功能:FGAD驅動LCD顯示中文字符“年”。
--最后修改日期:2004.3.24。
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
entity lcd_driver is
Port ( clk : in std_logic; --狀態機時鐘信號,同時也是液晶時鐘信號,其周期應該滿足液晶數據的建立時間
reset:in std_logic;
lcdda : out std_logic; --寄存器選擇信號
lcdrw : out std_logic; --液晶讀寫信號
lcden : out std_logic; --液晶時鐘信號
data : out std_logic_vector(7 downto 0)); --液晶數據信號
end lcd_driver;
architecture Behavioral of lcd_driver is
type state is (set_dlnf,set_cursor,set_dcb,set _cgram,write _cgram,set_ddram,write_data);
signal current_state:state;
type ram2 is array(0 to 7) of std_logic_vector(7 downto 0);
constant cgram:ram2:=(("00001000"),("00001111"),("00010010"),
("00001111"),("00001010"),("00011111"),("00000010"),("00000010"));--年字符數據存儲器
signal clkk : std_logic;
begin
lcden <= clk ; --液晶時鐘信號
lcdrw <= '0' ; --寫數據
control:process(clk,reset,current_state) --液晶驅動控制器
variable cnt1: std_logic_vector(2 downto 0);
begin
if reset='0'then
current_state<=set_dlnf;
cnt1:=(others => '1');
lcdda<='0';
elsif rising_edge(clk)then
current_state <= current_state ;
lcdda <= '0';
case current_state is
when set_dlnf=>
data<="00111100";--3cH
current_state<=set_cursor;
when set_cursor=>
data<="00000110";--06H
current_state<=set_dcb;
when set_dcb=>
data<="00001111";--0fH
current_state<=set_ cgram;
when set_ cgram=>
data<="01000000";--40H
current_state<=write_ cgram;
when write_ cgram=> --向CGRAM中寫入“年”
lcdda<='1';
cnt1:=cnt1+1;
data<=cgram(conv_integer(cnt1));
if cnt1 = "111" then
current_state<=set_ddram;
end if;
when set_ddram=> --從第一行的起始地址開始顯示
data<="10000000";--80H
current_state<=write_data;
when write_data=>
lcdda<='1';
data<="00000000"; --寫入字符“年”
when others => null;
end case;
end if;
end process;
end Behavioral;
評論
查看更多