完善資料讓更多小伙伴認識你，還能領取20積分哦，立即完善>
數據： USB 端口單刀雙擲 (SP2T) 開關支持 USB 和通用異步接收發器 (UART) 數據表 (Rev. A)
TSU6111A是一款支持阻抗偵測的高性能差分自主SP2T開關。此開關支持對多種通過DP，DM，和所有連接的附充的偵測。此充電器偵測滿足USB充電器規格v1.1并且V BUS_IN 具有一個28V的容壓以消除對外部保護的需要。當附加在一個充電器上時，通過系統的VBAT或者V BUS_IN 為這個器件供電。
SP2T開關由自動偵測邏輯電路或者通過I 2 C的手動配置進行控制。當使用USB或者UART線纜來測試開發和制造中的器件時，JIG和BOOT引腳被啟用.TSU6111A具有開漏JIG輸出（低電平有效）。
| Device Type |
| Number of Channels (#) |
| Configuration |
| VCC (Min) (V) |
| VCC (Max) (V) |
| Ron (Typ) (Ohms) |
| Input/Ouput Voltage (Min) (V) |
| Input/Ouput Voltage (Max) (V) |
| ICC (Max) (uA) |
| Bandwidth (MHz) |
| ESD HBM (Typ) (kV) |
| Features |
| Rating |
| Operating Temperature Range (C) |
| Package Group |
| Package Size: mm2:W x L (PKG) |
| Pin/Package |
| TSU6111A | BQ24392 | BQ24392-Q1 | TSU5511 | TSU5611 | TSU6111 | TSU6712 | TSU6721 | TSU8111 |
|---|---|---|---|---|---|---|---|---|
| USB/MHL Switch | USB/MHL Switch | USB/MHL Switch | USB/MHL Switch | USB/MHL Switch | USB/MHL Switch | USB/MHL Switch | USB/MHL Switch | |
| 2 | 2 | 1 | 2 | 2 | 2 | 2 | 2 | 2 |
| 1:2 SPDT | 1:1 SPST | 1:1 SPST | 1:3 SP3T | 1:3 SP3T | 1:2 SPDT | 1:4 SP4T | 1:3 SP3T | 1:2 SPDT |
| 3 | 4.75 | 4.75 | 2.8 | 2.8 | 3 | 3 | 3 | 1.65 |
| 6.5 | 5.25 | 5.25 | 6.7 | 6.7 | 6.5 | 6.5 | 6.5 | 6.5 |
| 8 | 8 | 6 | 4.5 | 4.5 | 8 | 8 | 6 | 8 |
| 0 | 0 | 0 | -1.3 | 0 | -0.8 | -1.5 | 0 | |
| 3.6 | 3.6 | 3.6 | 3.6 | 3.6 | 3.6 | 3.6 | 3.6 | |
| 75 | 250 | 115 | 70 | See data sheet | 75 | 600 | 155 | 150 |
| 920 | 920 | 1000 | 830 | 830 | 920 | 510 | 510 | 820 |
| 5 | 4 | 4 | 2 | 1.5 | 2 | 1.5 | 4 | 12 |
|
USB 2.0 UART BCv1.1 Charger Detection I2C Interface JIG and BOOT Support Attach and Detach Interrupt Surge Protection |
USB 2.0 BCv1.2 Charger Detection |
USB 2.0 BCv1.2 Charger Detection |
USB 2.0 UART Audio Switch (Negative Rail Capability) Click-Pop Reduction Charging Capability I2C Interface Impedance Detection |
USB 2.0 Audio Switch (Negative Rail Capability) Integrated LDO Impedance Detection |
USB 2.0 UART BCv1.1 Charger Detection I2C Interface JIG and BOOT Support Attach and Detach Interrupt Surge Protection |
Audio Switch (Negative Rail Capability) Charging Capability I2C Interface JIG and BOOT Support Impedance Detection |
USB 2.0 UART Audio Switch (Negative Rail Capability) ID Bypass Switch Charging Capability BCv1.2 Charger Detection I2C Interface JIG and BOOT Support Impedance Detection Attach and Detach Interrupt |
USB 2.0 Integrated Single-Cell Charger BCv1.1 Charger Detection Impedance Detection Thermal Regulation and Shutdown |
| Catalog | Catalog | Automotive | Catalog | Catalog | Catalog | Catalog | Catalog | Catalog |
| -40 to 85 | -40 to 85 | -40 to 125 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 |
| UQFN | UQFN | UQFN | DSBGA | DSBGA | UQFN | DSBGA | DSBGA | DSBGA |
| 16UQFN: 5 mm2: 1.8 x 2.6(UQFN) | 10UQFN: 3 mm2: 2 x 1.5(UQFN) | 10UQFN: 3 mm2: 2 x 1.5(UQFN) | See datasheet (DSBGA) | See datasheet (DSBGA) | 16UQFN: 5 mm2: 1.8 x 2.6(UQFN) | See datasheet (DSBGA) | See datasheet (DSBGA) | See datasheet (DSBGA) |
| 16UQFN | 10UQFN | 10UQFN | 20DSBGA | 20DSBGA | 16UQFN | 25DSBGA | 25DSBGA | 20DSBGA |
關注我們的微信
下載發燒友APP
電子發燒友觀察
版權所有 ? 湖南華秋數字科技有限公司
長沙市望城經濟技術開發區航空路6號手機智能終端產業園2號廠房3層（0731-88081133）
電子發燒友 （電路圖） 湘公網安備43011202000918
工商網監
湘ICP備2023018690號-1
