用于 -48V 冗余電源的 -12V 至 80V 熱插拔控制器
| FET | External |
| Vin (Min) (V) | -80 |
| Vin (Max) (V) | -12 |
| Vabsmax_cont (V) | -100 |
| Overcurrent response | Circuit breaker, Current limiting |
| Fault response | Auto-retry |
- Operating Supply Range of –12 V to –80 V
- Withstands Transients to –100 V
- Programmable Current Limit
- Programmable Linear Inrush Slew Rate
- Programmable UV/OV Thresholds
- Programmable UV and OV Hysteresis
- Fault Timer to Eliminate Nuisance Trips
- Power Good and Fault Outputs
- 14-Pin TSSOP Package
- APPLICATIONS
- –48-V Distributed Power Systems
- Central Office Switching
- ATCA Systems
- Base Stations
The TPS2394 is a hot swap power manager which can provide inrush limit, over current protection, short circuit protection. The TPS2394 operates with supply voltages from ?12 V to ?80 V, and withstands input transient to ?100 V.
The TPS2394 uses a power FET to provide load current slew rate control and peak current limiting that is programmed by one resistor and one capacitor. The device also provides a power good output to enable down-stream power converters and a fault output to indicate load problems.
